TRI STATE METER & REGULATOR

 

HOME

PRODUCTS

CONTACT US

 

BALL VALVES

 

BALON

 

 

 

Balon Technical and Engineering Data

Media and Application Guide      Seat Pressure-Temperature Ratings      Flow Data

Standards and Specifications        Identification Key

Series LS

Valve suited for severely corrosive media (CO2, H2S, Saltwater, etc)

Made of 316 stainless throughout, including balls, stem and handles

Non Lubricated * Locking device handle * Multi-seal * NACE standard

 

LS

Series LM Screwed-End

Superior Valve * Machined from Barstock * Rugged Bolted Construction

* Locking device and Handle * Multi-seal seat standard *

Low torque operation at full pressure * TFE seating optional

* NACE available 3000 PSI WP

LM

Series S Screwed-End / Grooved End / UNI-Directional

Non Lubricated valve * 500 to 20000 psig (ductile) * 3000 psig (stainless)

UNI-Directional modification for tank Draw-down services (optional)

1" thur 4" to 2000 PSI WP (3000 PSI Stainless)

* Meets NACE requirement if ordered with 316 Stainless Ball

 

S22-S32-S42-S62-S92 (Ductile Iron)

S03-S93 (Carbon Steel)

S95-S05 (Stainless Steel)

 

F-Series (Screwed End) Carbon Steel

* Bolted two-piece * Built-in locking device

Fire Safe Design * Meets NACE requirement if ordered with 316 Stainless Ball

1" thru 4" to 3000 PSI WP

 

F93-F03-F63

F-Series (Screwed End) Ductile Iron

* Enhanced physical properties * Higher yield strength than carbon steel valve * Better corrosion resistance * Built-in locking device

* Meets NACE requirement if ordered with 316 Stainless Ball

1" thru 4" to 2000 PSI WP

 

F92-F62-F42-F32

F-Series (Screwed End/Grove End) Aluminum Bronze

 Alternative to higher priced stainless steel valves

Ideal for CO2 secondary recovery applications

Fire Safe design * Better corrosion resistance * Built-in locking device * Bolted construction 316 Stainless ball and stem standard

 

F04N-F94N (Nace std)

F-Series (Flanged End) Ductile Iron

High grade Ductile * Maintenance Free * Std Multi-Seal seat 

* Internal Twin Stops

Safety Shear Groove * Built-in Locking device *

Available to meet NACE MR-0175

Flat-faced or Raised-face Configuration

2" thru 6" ANSI CLASS 125(FF), 150(RF), 300(RF)

 

F12-F32

F-Series (Flanged End) Carbon Steel

Two-piece Bolted Construction * Non-Lubricated * Easy field repair

Fire tested to meet API-6FA and BS-5655 Fire Safe Standards

 

F33 (ANSI 300)

F63 (ANSI 600)

F93-F03 (ANSI 900 & ANSI 1500)

F-Series (Flanged End) Carbon Steel Gear-Operated

Low Maintenance & Lower cost alternative to trunnion type ball valves

4" 600 ANSI Class Full bore

6" 150 ANSI and 300 Gear Operated for ease of operation on and off shore

Fire Safe * Non-Lubricant * 316 Stainless ball and stem

All meet NACE requirement

 

F13-F33-F63 (ANSI 150, 300, 600)

Series US  (Wld x Wld, Wld x Flg)

Weld end and Weld x Flange end valves have heat dissipating fins for convenient and safe field welding * Multi-Seal seat design * Rugged stainless steel 3/8" stops

Solid Ball design for reduced turbulence and pressure drop across the valve

2" thru 6"  150 and 300 ANSI

 

 

FW-(flange x weld)      BW-(butt weld)