HOME

PRODUCTS

CONTACT US

Cold Water Meter                   Return to PRODUCTS page

Industrial Positive Displacement
Meter Model C-700

Sizes: 5/8 x 1/2" to 2"

AMCO C700 oscillating piston type

 water meters are the most advanced design positive

displacement meters available. 

brochure

 5/8 x 1/2 ; 5/8 x 3/4,  3/4 x 3/4;  3/4 x 1,  1,

 1-1/2 ; 2"

Industrial Compound Meters
Model C-3000 COMBO
Bronze Magnetic Drive

Where service flow variations

 extend from very high to very

low, the C3000 Compound meter offers unparalleled

accuracy throughout the entire flow range.

Combining high accuracy T3000 Turbine

meter measurement (high flow) with a C700

volumetric piston type meter (low flow) in one assembly,

 and a high performance valve that directs flow to the

 appropriate chamber, the C3000 exceeds the

 performance required in AWWA Standard C-

702, maximizing accuracy and minimizing repair

 frequency and cost.

brochure

2" , 3" , 4", 6", 8"

Industrial Turbine Meters
Model T-3000

Sizes: 1-1/2, 2, 3, 4, 6, 8, 10, 12

For consistent medium to high flows,

 the T3000 Class II Turbine meters exceed AWWA

Standard C-701.  The T3000 family of top-performing

Turbine Meters includes waterworks and low-lead bronze

case sizes 1 ½” to 8” and epoxy-coated, cast-iron case

1 ½” to 12” meters.  Low-lead bronze sizes 1 ½” to 8”are

NSF-61 Certified.

Bronze Meter brochure:

1-1/2"-3",     4-8",    10-12"

Propeller Meter

Model R1000

The R1000, sizes 2'' to 10'',

is designed for measurement

of high flows of cold water,

in-plant applications for dirty water, standard agriculture

, river and lake pumping applications as well as normal

irrigation applications for water resource management.

brochure:

R1000

Model V100

V100 meters can also be

ordered with pulse output.

 The V100 is a compact,

lightweight positive displacement

meter of a piston design in

sizes ½”x ½” in polymer and ½”x ½”to 5/8”x ¾”. 

 Meters are low cost and operate ± 1 ½%.  V100 is for

services up to 120º F and 150 psi.  The V100 is

appropriate for applications with water conditioning

and purification.

brochure:

V100

Model H3200

The H3200 Hydrant Meter is

designed for temporary water

service from a fire hydrant or

for temporary metering of well

pumping, irrigation, construction,

testing or similar non-permanent

applications. The 3'' H3200 is a high-accuracy

AWWA Class II Turbine, with lightweight aluminum case.

This meter has internal 2½'' American Standard Taper Pipe

Thread end connections. Bronze National Standard Fire Hose

 Couplings are supplied. The inlet coupling has 2½'' NST

 female threads; the outlet 2½'' NST male threads

brochure

H3200

Oil Meters                               Return to PRODUCTS page

Industrial Oil Meters

ABB4, ABB8,

Sizes: 1/8, 1/4, 1/2, 3/4, 1", 1-1/2", 2"

For oil measurement of  light, medium and even heavy heating oil

and diesel oil, the AMCO Water Metering line offers oil meters from 1/8” through 2”, covering flows from ¼ to

8000 gph with accuracy ± 1%.

brochure:

1/8" , 1/4" , 1/2" , 3/4" , 1", 1-1/2", 2"

Electronic Meters                   Return to PRODUCTS page

AquaMaster Electronic Meter

AquaMaster revolutionizes high volume water measurement. Available in sizes 5/8" to 24", the rugged AquaMaster is designed to maximize revenue collection by offering a broad flow range with high accuracy, retention of high accuracy without testing or parts replacement, low-cost, foolproof installation, optional data logging capability and battery or mains-powered models to accommodate site requirements.

brochure: AQM

MagMaster

The MagMaster is an electromagnetic

 water meter operating on Faraday’s principle of induction. MagMaster

covers the full flow range of most mechanical meters with a high accuracy. MagMaster  is available in sizes 2” to 12” with

 industry standard 4-20 mA output of rate of flow data.

brochure: MM

Hot Water Meters                    Return to PRODUCTS page

Model H4400

Model H4400 can be installed in services where water temperature can reach 350° F and pressures

 are up to 195 psi (250° F at pressures up to 230 psi). Available in sizes 2'', 3'' and 4'', model H4400

offers improved low flow performance (± 2%). Two externally powered pulser models are available

 for the H4400, a reed switch pulser for output of 1 contact per 10 or 100 gallons, and an inductive

 (Namur) pulser for higher resolution (3.785 contacts per 1 gallon).

brochure: H4400

Model H4300

Model H4300 is a Woltman-design horizontal impeller meter, with only two moving parts, the impeller and magnet. The H4300, in sizes 2" h to 6", is a high accuracy turbine meter, operating with low flow accuracy ±3% and accuracy ±1% up to peak flow. The H4300 is recommended for measurement up to 250° F and pressure up to 230 psi. Either a reed switch element or opto-electronic pulse transmitter can be selected for the H4300.

brochure: H4300

Model M190

The M190 hot water meter, sizes 1''

and 1½'', is a multi-jet inferential meter designed for batch or continuous process monitoring of hot water up to 266° F in services up to 230 psi.

brochure: M190

Model M150

The M150, sizes 1'' and 1½'', is a multi-jet inferential impeller meter with NPT inlet and outlet. The M150 is designed for batch or continuous process monitoring of hot water up to 195° F and services up to 150 psi.

brochure: M150

Model S130

The ¾" S130 single-jet hot-water meter

 (up to 195° F and 150 psi) offers high accuracy (±2%) throughout the normal flow range, exceeding AWWA positive displacement

and multi-jet meter specifications, and low flow accuracy

±5%. The normal operating range of the S130 is 1 to 22 gpm

brochure: S130

Chemical Meters                      Return to PRODUCTS page

Model PVDF Turbine

PVDF Turbine, sizes ½'' and 1'' is designed for those applications where a more rugged meter is required. This unit retains all of the capabilities of the AMCO 316 SS Turbine Meter, plus the PVDF (Kynar) material and ceramic shaft allow use with approximately 100 more chemicals than stainless steel.

brochure: PVDF

Model 316 SS Turbine

316 Stainless Steel Turbine meters, in

sizes ½'' to 2'' for flows from 0.5 gpm to 1500 gpm, address a wide range of industrial and commercial fluid measuring applications. Meters can operate in high pressure (up to 1500 psi) applications.

brochure: SST-100,  SST-200

Model 316 Positive Displacement

Our 316 stainless steel Positive Displacement meter, in sizes ½'' through 2'', is available with a

choice of material combinations for compatibility with a wide range of industrial fluids. These

meters may be equipped with either a reed switch or inductive pulser for output to remote totalization

or control equipment.

brochure: SSPD-152025,   SSPD-4050

AMCO Electronics / Accessories               Return to PRODUCTS page

R420 W 4-20mA

Designed to operate with any AMCO meter with a pulser, the R420 provides rate indication, totalization and 4-20 mA DC analog output signal proportional to the flow rate.

The industrial Electronic Register is an

LCD display that has been installed in a watertight, aluminum housing easily

adapted for installation on AMCO C700, T3000 and H4000 cold-water meters.

 The ER is designed to replace

 mechanical registers with LCD displays

 of rate indication and totalization in the basic unit.

This index is also resettable.

Inline Strainers

Vertical Z-plate design strainers are recommended to protect AMCO T3000 and C3000 cold-water

 meters from the damaging effects of debris and foreign material. The strainer improves the velocity

profile of the water being metered and minimizes the effects of velocity distortion caused by upstream

valves and fittings. Strainers are for use in potable cold water up to 120° F and working pressure up

to 150 psi and should be installed immediately upstream from the meter.